Auto Service World

APRIL 15, 2025

A forecast released by DesRosiers Automotive Consultants found that the provinces goal of 90 per cent ZEV sales by 2030 is unattainable, with the best-case scenario projecting only 57 per cent by that time.

Electric Vehicles 130

Electric Vehicles Consulting Automobile Manufacturing 130

Tomorrow's Technician

NOVEMBER 12, 2024

According to Boston Consulting Group, nearly half of all new car sales in the U.S. Monta said its solution helps hardware manufacturers optimize their products by benchmarking charge point brands, providing insights into usage and performance, and accelerating troubleshooting and maintenance. We are thrilled to announce our U.S.

Troubleshooting 130

Troubleshooting Software Consulting Manufacturing 130

Automotive Training Centre

MAY 15, 2024

Diagnosis: Don’t panic; consult the owner’s manual to understand the specific warning system of the EV you’re working on. If the light persists, consult the manufacturer’s service recommendations. This infrequent use can trigger a false low brake fluid warning light.

Automotive 264

Automotive Consulting Electricity Electric Vehicles 264

Auto Service World

OCTOBER 2, 2024

Through a survey of vehicle owners, AIA Canada, in collaboration with Quorus Consulting Group, explored behaviours, attitudes and preferences related to in-vehicle data, including data ownership preferences and expectations, self-assessed awareness of the types and amount of data produced by their vehicles and data-sharing preferences.

Vehicle 275

Vehicle Manufacturing Consulting Insurance 275

Automotive Training Centre

NOVEMBER 29, 2023

Torque to Manufacturers Recommendations Proper torquing is an essential part of tire installation. After carefully mounting the tire onto the wheel hub, tightening the lug nuts to the manufacturer’s recommended torque specifications is crucial. Regular calibration of torque wrenches is also vital to maintain accuracy.

Auto Mechanic Training 316

Auto Mechanic Training Mechanic Automotive Manufacturing 316

Auto Service World

DECEMBER 10, 2024

A new report covering the first half of 2024 shows that value-focused car brands like Toyota, Kia and Hyundai gained traction as consumers leaned toward practicality amid steady inflation and increased manufacturer incentives.

Vehicle 277

Vehicle Electric Vehicles Electricity Consulting 277

AutoSuccess

MAY 14, 2025

To thrive in this environment, dealers must adopt a strategic game plan that focuses on navigating change and uncertainty while remaining consultative and customer-centric. Vehicle service contracts are essential, offering extended coverage beyond the manufacturers warranty and protecting customers from unexpected repair costs.

Consulting 52

Consulting Vehicle Manufacturing Customer Service 52

Brake & Front End

MAY 14, 2025

CV Axle Popper (Wedge Style): If the axle is stubborn, and approved by the manufacturer, a CV axle popper will do the job safely. Trakmotive Tip: Always consult your vehicles service manual for specific torque specifications and approved procedures. Screwdrivers or Chisels as Pry Bars?

Consulting 245

Consulting Insurance Vehicle Manufacturing 245

CATI

OCTOBER 31, 2024

Prioritize brands and manufacturers known for reliability, even if they cost slightly more. As an aspiring Auto Parts Consultant, you’ll learn to navigate demand forecasting, supplier management, and inventory control, ensuring your shop runs seamlessly. This knowledge is crucial when it comes to ordering inventory.

Management 111

Management Air Conditioning Software Automotive 111

CATI

NOVEMBER 7, 2024

Diesel Engine Specialist Those who want to focus on diesel engines can specialize as diesel engine specialists, working in automotive, power generation, and manufacturing. Specialists with strong diagnostic skills may also move into engine design or consulting, helping companies optimize performance and sustainability.

Diesel Mechanics 105

Diesel Mechanics Mechanic Hydraulics Engineering 105

Automotive Training Centre

APRIL 17, 2024

This will help you create a repair plan that restores the frame to the manufacturer’s specifications. Don’t hesitate to consult with experienced technicians or structural engineers for severe frame damage or compromised safety structures. Even minor deviations can affect vehicle handling and safety.

Body Repair 259

Body Repair Auto Mechanic Training Automotive Hydraulics 259

Brake & Front End

MAY 10, 2024

in 1998 for university, he ventured into food manufacturing post-graduation before diving into consulting. A chance encounter with Continental during a consulting project in Mexico led Cal to discover an opportunity in tire assembly supervision in Charlotte. Arriving in the U.S.

Hydraulics 130

Hydraulics Consulting Manufacturing Engineering 130

Automotive Training Centre

JULY 17, 2024

During consultations, explain the difference between using OEM (original equipment manufacturer) parts and high-quality aftermarket parts. Educate Clients on Repair Options After Auto Body Training Your clients may need to become more familiar with the full spectrum of repair options available.

Insurance 258

Insurance Car Education Auto Body Shop 258

Tomorrow's Technician

JULY 12, 2024

A brand of the ADD Group, one of the largest manufacturers of Complete Strut Assemblies in the world, announces the arrival of new applications of the component for Light vehicles, SUV’s and pickups. PRT is continuously extending the portfolio of Complete Strut Assemblies in the North American Aftermarket. The new items are ready to ship!”

Consulting 130

Consulting Manufacturing Vehicle 130

Brake & Front End

JULY 12, 2024

A brand of the ADD Group, one of the largest manufacturers of Complete Strut Assemblies in the world, announces the arrival of new applications of the component for Light vehicles, SUV’s and pickups. PRT is continuously extending the portfolio of Complete Strut Assemblies in the North American Aftermarket. The new items are ready to ship!”

Consulting 130

Consulting Manufacturing Vehicle 130

Brake & Front End

NOVEMBER 27, 2023

ADD Group, one of the largest manufacturers of Shocks, Struts and Complete Strut Assemblies in the world, will be exhibiting innovations and various product lines at HALL 3 Booth 3N35 in the Automechanika Shanghai 2023. More information about the ADD products can be consulted through the company’s website www.addchina.com.

Consulting 130

Consulting Electric Vehicles Trucking Manufacturing 130

Auto Service World

MARCH 23, 2025

Understanding Lemon Laws and Their Purpose Lemon laws vary from state to state, but in a broader sense, they require the manufacturers to replace or refund the defective vehicle. A common approach adopted by many consumers is to resolve these claims directly with the manufacturers or dealerships. This necessitates legal assistance.

Manufacturing 130

Manufacturing Vehicle Consulting Engineering 130

Auto Service World

SEPTEMBER 11, 2024

As electric vehicles continue to gain traction, a recent study from research and consulting firm Parks Associates found a growing trend among EV owners: A strong inclination toward adopting smart home technologies. The post EV owners also use smart home tech appeared first on Auto Service World.

Electric Vehicles 163

Electric Vehicles Management Consulting Electricity 163

Tomorrow's Technician

JULY 22, 2024

Thanks to the wide variety of vehicles on the road today, you just can’t count on one type of adapter to work equally well on a pickup truck, EV, and low-slung sports car – or even on the same type of vehicle from different manufacturers. Follow manufacturer recommendations. It wasn’t really a recommendation as much as it was an order.

Trucking 130

Trucking Manufacturing Consulting Vehicle 130

Scotty's Automotive Services

JANUARY 9, 2025

Troubleshooting and Maintenance Tips To keep your car heating system in top condition, follow these troubleshooting and maintenance tips: Check Coolant Levels: Ensure your coolant levels are topped up to the manufacturer’s specifications. Inspect Thermostat: Check the thermostat for proper operation and replace it if necessary.

Troubleshooting 69

Troubleshooting Car Engineering Consulting 69

Auto Service World

MAY 3, 2025

The automotive industry relies on precision, efficiency, and cost-effectiveness in manufacturing. Understanding how injection molding works and its significance in automotive manufacturing can provide insights into why it remains indispensable. One of the most critical processes enabling these requirements is injection molding.

Automotive 130

Automotive IT Manufacturing Engineering 130

Tire Review Magazine

FEBRUARY 20, 2025

The event also included a trade show, where manufacturers and suppliers showcased the latest products and networked with peers. Consultant Jeff Faubion and Matt White, director of off-road tire service for TIA, held a live service demonstration focused on cribbing and lifting in the field. AME International booth.

Consulting 59

Consulting Management Trucking Technical 59

Louisville Automotive Shop

FEBRUARY 9, 2025

Ensure that the coolant is filled to the proper level and is a mix of 50% coolant and 50% water, as recommended by most manufacturers. Check your owner’s manual or consult with a professional to determine the proper antifreeze to use.

Engineering 55

Engineering Consulting Vehicle Manufacturing 55

AutoSuccess

MARCH 19, 2025

Think about the manufacturers and the dealership you represent. Building Our Personal Brand The most successful sales consultants understand that their personal brand is built through small, consistent actions that demonstrate who they are and what they stand for. As sales professionals, we are the human embodiment of these brands.

Automotive 52

Automotive Consulting Manufacturing Vehicle 52

Tire Review Magazine

JULY 22, 2024

Pursuant to a Product Supply Agreement to be entered into with Yokohama in connection with the closing of the transaction, Goodyear said it will manufacture certain OTR tires for Yokohama at some of its manufacturing locations for an initial period of up to five years after the closing of the transaction.

Consulting 98

Consulting Manufacturing IT 98

Auto Service World

JANUARY 12, 2025

Manufacturers must innovate while managing costs which makes simulation tools essential in their operations. Automotive manufacturers now cannot function without this software because it enables complex scenario simulations which lower physical testing expenditures. of the share in 2023.

Software 130

Software Automotive Manufacturing Electric Vehicles 130

Tire Review Magazine

MARCH 5, 2024

They’re going out to their fleets and the industry and are providing more services, like fleet checks, air pressures, consulting on new tires,” says Brian Sheehey, senior vice president of Ralson Tire North America. “The tire industry is a dynamic industry just as the vehicle industry is.

Consulting 98

Consulting Manufacturing Electric Vehicles Management 98

Auto Remarketing

JANUARY 8, 2025

Supply chain management: Blockchain can track parts from manufacture to installation, ensuring authenticity and reducing counterfeit parts in circulation. Brad is the founder and principal consultant at Leroy Lynn, LLC, consulting companies focused on blockchain, AI, and data science solutions.

Automotive 52

Automotive Finance Consulting Education 52

Brake & Front End

JUNE 3, 2024

Manufacturers either provide such a statement with the converter or have an example in their catalogs.) Install the proper converter for the vehicle as determined and specified by the converter manufacturer. Therefore, the catalog should always be consulted for the correct application.

Manufacturing 130

Manufacturing Vehicle Consulting Engineering 130

RB Auto Service

JANUARY 9, 2025

Tires Tire Pressure: Check and adjust tire pressure according to the manufacturer’s recommendations. Timing Belt: If due for replacement based on the manufacturer’s recommendation, consider getting it replaced before the trip. Brake Fluid: Check the brake fluid level for optimal braking performance. Safe travels!

Car 52

Car Fluid Check Engineering Consulting 52

Tomorrow's Technician

FEBRUARY 6, 2024

The bill added headlamps, fenders, hoods, tail lamps, and bumper components to the definition of aftermarket crash parts; added language to written disclosure statements telling consumers that non-OEM crash parts may affect safety and performance of a vehicle, and recommended that consumers consult with a qualified industry expert or repair shop before (..)

Insurance 130

Insurance Consulting Manufacturing Vehicle 130

Tire Review Magazine

NOVEMBER 9, 2024

During retirement, he will remain involved with OTR, serving as a part-time consultant. Although we’re sad to see him leave, we’re thrilled that he’ll continue consulting with us.” Pagliarulo began his career as a mechanical engineer for Global Wheel, a South African wheel manufacturer.

Engineering 52

Engineering Consulting Management Mechanic 52

Tomorrow's Technician

SEPTEMBER 30, 2024

This includes regular fluid changes, as recommended by the manufacturer, and monitoring the fluid level and condition. Consult the owner’s manual to ensure you are choosing the correct fluid type and quality for the specific make and model.

Hydraulics 130

Hydraulics Consulting Engineering Vehicle 130

Tire Review Magazine

DECEMBER 17, 2024

These include the LODC holistic consultancy approach to reduce operating costs, the special-purpose tires for vans, and the current range of tires for commercial vehicles. We have come up with a different kind of platform here to discuss questions raised by haulage companies, tire retailers and vehicle manufacturers.

Trucking 52

Trucking Consulting Retail Management 52

Tire Review Magazine

MAY 7, 2025

Manufacturers design specific procedures that can trigger a relearn, making sure the TPMS light will be off when the car leaves the shop. When basic inflation and sensor functionality checks don’t resolve the issue, your technicians should consult service information and technical service bulletins.

Consulting 52

Consulting Technical Vehicle Manufacturing 52

Tire Review Magazine

MAY 7, 2025

Manufacturers design specific procedures that can trigger a relearn, making sure the TPMS light will be off when the car leaves the shop. When basic inflation and sensor functionality checks don’t resolve the issue, your technicians should consult service information and technical service bulletins.

Consulting 52

Consulting Technical Vehicle Manufacturing 52

Brake & Front End

SEPTEMBER 12, 2024

” National Car Charging will be supplying both networked and non-networked fast charging solutions from a wide range of manufacturers including ChargePoint, Kempower, and Webasto. Prior to offering hardware and software recommendations, NCC provides consulting and planning services to ensure the right solution for school districts.

Education 100

Education Car Software Consulting 100