Tire Review Magazine

OCTOBER 1, 2023

The post Pre-Q Galgo Corporation Marks 25 Years of Rubber Manufacturing appeared first on Tire Review Magazine.

Manufacturing 52

Manufacturing 52

Brake & Front End

DECEMBER 4, 2023

As a result, some manufacturers will flat-out say they can’t be reused. Other manufacturers will specify that the fastener should be measured before being reused. Annual calibration service is recommended by most torque wrench manufacturers. Depending on the application, some torque-to-yield fasteners can be used only once.

Manufacturing 246

Manufacturing Trucking Mechanic Vehicle 246

Automotive Training Centre

NOVEMBER 29, 2023

Torque to Manufacturers Recommendations Proper torquing is an essential part of tire installation. After carefully mounting the tire onto the wheel hub, tightening the lug nuts to the manufacturer’s recommended torque specifications is crucial.

Auto Mechanic Training 203

Auto Mechanic Training Mechanic Automotive Auto Repair 203

Tomorrow's Technician

NOVEMBER 27, 2023

The issue is vehicles that were manufactured for the California market find their way to other states. MC: A two-character code for the converter manufacturer. YYYY: The date of manufacture. The first three Xs are a 3-digit number corresponding to the manufacturer. ZZZZ: The date of manufacture. What About The VIN?

Vehicle 130

Vehicle Manufacturing Emissions Testing Automotive 130

Jalopnik

NOVEMBER 8, 2023

Good morning! It’s Wednesday, November 8, 2023, and this is The Morning Shift , your daily roundup of the top automotive headlines from around the world, in one place. Here are the important stories you need to know. Read more.

Automotive 123

Automotive Manufacturing Electric Vehicles Electric Cars 123

Brake & Front End

NOVEMBER 21, 2023

campaign, the coalition of TPMS manufacturers, including ATEQ, Bartec TPMS, Continental, and Schrader, hosted a press conference at the 2023 AAPEX Show. To help further promote their “Update Your TPMS Tools!” For more information on the campaign, please visit www.updateyourtpmstools.com. The post Are Your TPMS Tools Updated?

Manufacturing 130

Manufacturing Software Retail Education 130

Auto Service World

NOVEMBER 7, 2023

Lead wheel weights can’t be manufactured or imported into Canada as of February 3, 2024. The Automotive Retailers Association of Ontario put out a bullet last week advising of the new regulations. However, even after the ban comes into place, … The post Canada bans lead wheel weights appeared first on Auto Service World.

Automotive 208

Automotive Manufacturing Retail Auto Repair 208

Brake & Front End

NOVEMBER 1, 2023

When you are buying a prescription drug you are not just paying the cost to manufacture, package and market the pill. A quality brake pad manufacturer will spend a lot of time and money on developing a brake pad application for your vehicle. Another cost of brake pad manufacturing is quality control.

Vehicle 130

Vehicle Manufacturing Car Mechanic 130

Tomorrow's Technician

NOVEMBER 1, 2023

When you are buying a prescription drug you are not just paying the cost to manufacture, package and market the pill. A quality brake pad manufacturer will spend a lot of time and money on developing a brake pad application for your vehicle. Another cost of brake pad manufacturing is quality control.

Vehicle 130

Vehicle Manufacturing Car Mechanic 130

Tomorrow's Technician

NOVEMBER 8, 2023

The battery modules, consisting of high-nickel NCMA (nickel, cobalt, manganese, aluminum) pouch-type cells, will be manufactured in LG Energy Solution’s Michigan facility, the companies said. Initially, the battery modules will go to Toyota Motor Manufacturing Kentucky to be assembled into battery packs and equipped onto BEVs.

Electric Vehicles 130

Electric Vehicles Manufacturing Automotive Vehicle 130

Brake & Front End

OCTOBER 30, 2023

All-electric vehicle manufacturer Rivian announced the launch of a new apprenticeship program to support the development of trained staff at its future manufacturing plant in Stanton Springs North, Georgia.

Apprenticeship 130

Apprenticeship Electric Vehicles Manufacturing Vehicle 130

Tomorrow's Technician

NOVEMBER 21, 2023

For the first time in AAPEX history, distributors, manufacturers, tool and equipment providers and service professionals from around the country worked together in Joe’s Garage to service and repair a vehicle on the show floor during the 2023 AAPEX Show in Las Vegas.

Vehicle Repair 246

Vehicle Repair Vehicle ASE Automotive 246

Tomorrow's Technician

DECEMBER 4, 2023

“Until now, spare parts were only available from the car manufacturer because most electric cars were still covered by the manufacturer’s warranty. It is often peripheral parts such as sensors, plugs, housings or cables that are affected, as opposed to central components such as electric motor or power electronics, ZF said.

Electricity 130

Electricity Electric Cars Vehicle Car 130

Brake & Front End

OCTOBER 18, 2023

American Manufacturing Co. Driving Innovations in Windshield Washer Fluid and Sustainable Car Maintenance American Manufacturing Co. Driving Innovations in Windshield Washer Fluid and Sustainable Car Maintenance American Manufacturing Co. Visitors to the American Manufacturing Co.

Automotive 130

Automotive Manufacturing Car Mechanic 130

autoevolution

NOVEMBER 27, 2023

There I was, searching for the freshest e-bikes, when out of nowhere, I found myself exploring a manufacturer from the other side of the Atlantic, the UK's Ebco e-Bikes. Here, I ran across the rather funky Street lineup.

Manufacturing 105

Manufacturing IT 105

Auto Service World

SEPTEMBER 18, 2023

Hazet is a manufacturer of hand tools and workshop equipment. Two companies are teaming up to develop needs for automotive shops. SKF and Hazet announced the technical partnership for the independent automotive aftermarket where they will co-develop solutions.

Automotive 177

Automotive Technical Manufacturing Auto Repair 177

Tomorrow's Technician

OCTOBER 17, 2023

This is the easy part of manufacturing the brake rotor. The hard part of manufacturing a rotor is matching the internal structure, metallurgy and performance. The supply chain could benefit by comparing and evaluating rotor manufacturers as well as adding consistency and accountability — which would benefit shops directly.

Manufacturing 130

Manufacturing Vehicle Automotive Mechanic 130

Jalopnik

NOVEMBER 30, 2023

Romanian manufacturer and Renault subsidiary Dacia has sold more than 2.2 million units of its Duster SUV since the model’s launch in 2010 – 1,000 new ones are built every day! making it Europe’s most popular SUV and a huge success in markets like Latin America. The Duster has been renowned for its off-road… Read more.

Manufacturing 125

Manufacturing Automobile IT Trucking 125

Auto Service World

JULY 4, 2023

Tire Pressure Monitoring System manufacturers want to remind automotive service professionals to keep their tools up to date.

Automotive Services 227

Automotive Services Automotive Manufacturing Auto Repair 227

Tomorrow's Technician

NOVEMBER 29, 2023

This step is essential to achieve the quality and purity required for the lithium to be reused in new battery manufacturing. This waste, generated by battery cell manufacturers, electric vehicle producers and energy storage systems, will be processed in southern Ontario to produce black mass feed material for Electra’s refinery.

Electric Vehicles 130

Electric Vehicles Manufacturing Vehicle Electricity 130

Tomorrow's Technician

JUNE 30, 2023

Automotive parts manufacturer NVH Korea will establish a new facility in Locust Grove, Georgia, according to Gov. NVH Korea is an automotive parts manufacturer based in the City of Ulsan and established in 1984. The company also operates a manufacturing facility that produces floor mats, cargo mats and cargo trays in Georgia.

Electric Vehicles 130

Electric Vehicles Automotive Manufacturing Vehicle 130

Jalopnik

DECEMBER 2, 2023

I came across a bit of commentary on the website Slate.com that was mostly about last week’s Bentley crash at the Rainbow Bridge , and it contained the following: “Why would an automaker manufacture a car with so much engine power that it requires an eight-speed transmission? The obvious answer is: because people pay a… Read more.

Car 113

Car Manufacturing Engineering IT 113

autoevolution

NOVEMBER 27, 2023

The Ferrari F8 is a mid-engined sports car (Type F142MFL) manufactured by exotic Italian automaker Ferrari since 2019. A video from late last month filmed for a channel called Smiley's Farm just surfaced online, and we're getting confirmation that Corvette E-Rays are also Ferrari killers, exactly like the Z06 siblings.

Car 119

Car Manufacturing Engineering 119

Tomorrow's Technician

NOVEMBER 16, 2023

Manufacturers can get creative when designing elements such as improved oil drain back, bore centers, lifter locations, etc. Having this done by the manufacturer reduces our workload once we receive the block and heads, and frees up our CNC machines for other tasks, like parts manufacturing.

Engineering 130

Engineering Manufacturing Insurance Media 130

AutoShopOwner

OCTOBER 30, 2023

Source: Bloomberg UAW Leaders OK Ford Deal with $8B in Manufacturing Investment The UAW’s tentative agreement with Ford Motor Co. calls for the automaker to invest more than $8 billion in manufacturing investments, including $1.2 Those agreements still need to be voted on by the companies’ union members. billion in Louisville, Ky.,

Electric Vehicles 130

Electric Vehicles Automotive Vehicle Electricity 130

autoevolution

DECEMBER 5, 2023

Folks, today we'll be exploring a South African camper manufacturer by the name of Badger Caravans. Ever since the recent on-road and camper living wave took off, most of the continents that have been soaking up all the attention have included North America, Australia, and even Europe. Well, Africa is now part of the game, too!

Manufacturing 97

Manufacturing IT 97

Tomorrow's Technician

OCTOBER 11, 2023

American Battery Solutions has signed a multi-year contract with bus manufacturer NFI Group Inc. The production of the batteries will be done at ABS’ manufacturing plant in Springboro, Ohio, the company said. NFI is now launching ABS batteries into bus production for customer deliveries starting in the first quarter of 2024.

Transportation 130

Transportation Electricity Manufacturing Engineering 130

Brake & Front End

NOVEMBER 27, 2023

ADD Group, one of the largest manufacturers of Shocks, Struts and Complete Strut Assemblies in the world, will be exhibiting innovations and various product lines at HALL 3 Booth 3N35 in the Automechanika Shanghai 2023.

Electric Vehicles 130

Electric Vehicles Vehicle Trucking Electricity 130

Brake & Front End

DECEMBER 6, 2023

Manufacturers in the aftermarket space are concerned about this issue and are working to improve cataloging accuracy and provide better diagnostic support to customers. One of the main reasons for returns is customers ordering the wrong part or failing to diagnose the issue correctly.

Vehicle 130

Vehicle Manufacturing 130

Tomorrow's Technician

DECEMBER 5, 2023

The Velion 150kW DC fast charger is built using industrial-grade components, drawing on Lincoln Electric’s over 100 years of experience in designing and manufacturing industrial equipment, including over five decades in electric power conversion systems for outdoor environments, the company said.

Electricity 130

Electricity Electric Vehicles Vehicle Manufacturing 130

AutoSuccess

DECEMBER 5, 2023

Toyota will invest an additional $8 billion in its first North American electric vehicle battery manufacturing facility, announced the Economic Development Partnership of North Carolina, adding another 3,000 jobs. The project, dubbed “Toyota Battery Manufacturing North Carolina” (TBMNC) was first announced as a $1.29 billion.

Electric Vehicles 52

Electric Vehicles Vehicle Electricity Manufacturing 52

Automotive Training Centre

OCTOBER 11, 2023

South Korea’s firm, Volta Energy Solutions, a subsidiary of Solus Advanced Materials, has announced its intention to establish a copper foil manufacturing facility in Quebec by 2026, specifically designed to cater to the exponentially growing North American electric vehicle market. million electric vehicle batteries.

Mechanic 276

Mechanic Electric Vehicles Electricity Auto Repair Shop 276

Jalopnik

OCTOBER 30, 2023

Manufacturers have had supply issues building electric vehicles as well as trouble actually selling the ones they have… Read more. The transition to electric vehicles is supposed to be a matter of when not if. However, automakers are starting to seem a little hesitant about what resources they should pour into EV production.

Electric Vehicles 141

Electric Vehicles Vehicle Electricity Manufacturing 141

autoevolution

DECEMBER 3, 2023

That's right, people; Ornus, an Italian cycle manufacturer with absolutely no presence in the cycling market except with ( continue reading. ) I'm talking about Ornus and their freshly unveiled gravel bike, a piece of CNC-milled wood suitable for the sort of riding we never dreamed of on a wooden machine.

Manufacturing 98

Manufacturing 98

Jalopnik

NOVEMBER 22, 2023

There’s an automotive manufacturer that you just can’t stand — probably irrationally — and you’d never buy any of their products. Think of an automotive brand you hate. Maybe you got burned once a long time ago and don’t trust the company anymore. Maybe you’re a racing fan and cheer against their team or driver every… Read more.

Automotive 120

Automotive Car Manufacturing Trucking 120

Tire Review Magazine

NOVEMBER 13, 2023

Kenda Chairman Jimmy Yang said the over $20 million project will increase manufacturing capabilities and capacity for Martin Wheel, which Kenda acquired in 1999. ” On top of producing at least 20,000 wheels per day, Yang said the manufacturing facility is being built with ESG initiatives and compliance in mind. .

Manufacturing 98

Manufacturing Customer Service IT 98

Tomorrow's Technician

NOVEMBER 9, 2023

As a result, some manufacturers will flat-out say they can’t be reused. Other manufacturers will specify that the fastener should be measured before being reused. Annual calibration service is recommended by most torque wrench manufacturers. Depending on the application, some torque-to-yield fasteners can be used only once.

Manufacturing 130

Manufacturing Trucking Mechanic Vehicle 130