Automotive Training Centre

JUNE 5, 2025

Service bulletins, more formally known as Technical Service Bulletins (TSBs), are documents issued by vehicle manufacturers to alert technicians to common issues found in specific makes and models. Technicians who stay updated on manufacturer bulletins are simply more effective. Employers notice that.

Auto Mechanic Training 161

Auto Mechanic Training Mechanic Check Engine Light Software 161

Automotive Training Centre

MAY 1, 2025

Although OBD-I provided only basic codes and limited standardization between manufacturers, it was a breakthrough. Mechanics could now plug a diagnostic tool into the car to retrieve fault codes, dramatically speeding up troubleshooting. These systems allowed vehicles to self-monitor and alert drivers when something went wrong.

Mechanic 161

Mechanic Auto Mechanic Training Engineering Automotive 161

Automotive Training Centre

JUNE 10, 2025

Use Technical Service Bulletins (TSBs) A good technician reviews manufacturer bulletins for known issues related to the symptoms. ATC Toronto courses emphasize diagnostic logic, troubleshooting, and efficient work practices.

Auto Mechanic Training 154

Auto Mechanic Training Mechanic Troubleshooting Parts Replacement 154

Tomorrow's Technician

JULY 9, 2024

Check and change the transfer case fluid as recommended by the manufacturer to prevent premature failure. The post Transfer Cases and AWD/4WD Systems: Operation and Troubleshooting appeared first on Tomorrows Technician. Thanks for watching. This video is sponsored by The Pronto Network.

Troubleshooting 130

Troubleshooting Electronics Vehicle Manufacturing 130

Tomorrow's Technician

NOVEMBER 12, 2024

Monta said its solution helps hardware manufacturers optimize their products by benchmarking charge point brands, providing insights into usage and performance, and accelerating troubleshooting and maintenance. We are thrilled to announce our U.S. As part of its U.S. and Canada.

Troubleshooting 130

Troubleshooting Software Consulting Manufacturing 130

Tomorrow's Technician

MAY 13, 2025

Unfortunately, over half of the starters and alternators returned to manufacturers like BBB as defective actually test out perfectly. For more information on warranty procedures, troubleshooting, and best practices, visit TERREPOWER.com. Make sure to inspect the unit thoroughly for signs of contamination before submitting a claim.

Electricity 167

Electricity Troubleshooting Engineering Manufacturing 167

Automotive Training Centre

SEPTEMBER 5, 2024

AR enhances vehicle design, manufacturing, and user experiences, becoming essential in modern automotive technology. Applications of Augmented Reality in Automotive Technology The integration of AR in automotive technology is transforming the industry, improving everything from manufacturing and maintenance to driver experience and safety.

Automotive 276

Automotive Manufacturing Troubleshooting Vehicle 276

Scotty's Automotive Services

JANUARY 9, 2025

In this article, we will explore the different components of a car heating system, common issues that may arise, and how to troubleshoot them effectively. Your car’s heating system plays a significant role in keeping you warm during winter months, defrosting your windshield, and ensuring your engine runs smoothly.

Troubleshooting 69

Troubleshooting Car Engineering Consulting 69

Automotive Training Centre

DECEMBER 8, 2023

Follow manufacturer guidelines meticulously to disconnect the high-voltage battery and ensure all safety interlocks are engaged. Additionally, following manufacturer specifications for battery cooling systems is imperative. In addition, it is essential to isolate the high-voltage system before beginning any repair work.

Electric Vehicles 264

Electric Vehicles Electricity Automotive Vehicle 264

CATI

APRIL 3, 2025

As manufacturers work to improve fuel efficiency and vehicle performance, they are increasingly turning to alternatives that reduce overall weight while maintaining structural integrity. Recyclable Composites: Sustainability is a major focus in modern manufacturing. These innovations enhance vehicle safety and open new possibilities.

Mechanic 93

Mechanic Automotive Auto Mechanic Training Manufacturing 93

Automotive Training Centre

MAY 15, 2024

If the light persists, consult the manufacturer’s service recommendations. Consulting the manufacturer’s manual or contacting their support will provide specific troubleshooting steps for your particular EV model. As per hybrid and electrical mechanic training, an EV’s low brake fluid warning can be false.

Automotive 264

Automotive Consulting Electricity Electric Vehicles 264

Solera

MARCH 19, 2025

The comprehensive guide below features step-by-step diagnostic and repair solutions for troubleshooting a faulty MAF sensor. Automotive manufacturers typically position the MAF sensor between the air filter and throttle body. MAF Sensor Troubleshooting The next step in diagnosing a faulty MAF sensor is to remove and inspect it.

Check Engine Light 130

Check Engine Light Engineering Troubleshooting Mechanic 130

Automotive Training Centre

MAY 29, 2024

As you’ll discover in automotive school, self-driving car manufacturers still face some challenges How Your Automotive Technology Training Fits In While the headlines might focus on self-driving technology, the future of automotive repair remains bright. Stay updated on evolving technology : The automotive industry is constantly innovating.

Automotive 263

Automotive Troubleshooting Vehicle Automotive Repair 263

Brake & Front End

MAY 21, 2025

Unfortunately, over half of the starters and alternators returned to manufacturers like BBB as defective actually test out perfectly. For more information on warranty procedures, troubleshooting, and best practices, visit TERREPOWER.com. Make sure to inspect the unit thoroughly for signs of contamination before submitting a claim.

Electricity 100

Electricity Troubleshooting Engineering Manufacturing 100

Tomorrow's Technician

DECEMBER 14, 2023

Enhanced Diagnostic Capabilities An updated programming tool provides access to the latest diagnostic codes, troubleshooting procedures and repair information. TPMS tool manufacturers recommend connecting your tool and checking for updates monthly.

Software 130

Software Technical Troubleshooting Manufacturing 130

Solera

JUNE 18, 2024

Verified sources such as OE manufacturer repair manuals, technical bulletins, and certified databases from ASE Master level technicians, provide auto mechanics with precise, up-to-date information tailored to specific vehicle models that can be trusted.

Auto Repair 130

Auto Repair Mechanic Auto Repair Shop ASE 130

Tomorrow's Technician

FEBRUARY 29, 2024

The demand for a trained EV workforce is rapidly growing due to state-wide zero-emission vehicle mandates which has led to the growth of electric vehicle and electric vehicle component manufacturers throughout the US.

Vehicle 130

Vehicle Electric Vehicles Education Troubleshooting 130

Solera

MARCH 12, 2025

The guide below features a comprehensive VIN year chart designed to help mechanics quickly decode vehicle manufacturing years. Prior to 1981, several automotive manufacturers used VINs, but they didnt follow the same standardized formatting as those designated in 1981 and thereafter.

Mechanic 130

Mechanic Manufacturing Vehicle Insurance 130

Tomorrow's Technician

JULY 17, 2024

No longer is it just the check engine light giving an indication; specific lights or the lack of lights can signify an issue as well as the vehicle manufacturer indications in the information system on the dash. Now, a technician must have the skills of an IT specialist to understand and troubleshoot systems.

Electronics 130

Electronics Manufacturing Collision Repair Troubleshooting 130

Tomorrow's Technician

APRIL 5, 2024

The converter has an efficiency rating that is computed by the vehicle’s manufacturer. There are a few requirements that vary from manufacturer to manufacturer. The PCM compares the signals from the upstream and downstream oxygen sensors to determine the state of the converter. These “tests” are called the readiness monitors.

Engineering 189

Engineering Management Vehicle Manufacturing 189

Brake & Front End

FEBRUARY 26, 2024

European vehicle manufacturers were the first to adopt the AGM battery, and today, about half use AGM batteries, while the others use Enhanced Flooded Batteries (EFB). As all automakers approach battery management differently, troubleshooting and installing batteries can seem overwhelming.

Management 246

Management Engineering Vehicle Electricity 246

Auto Service World

JANUARY 25, 2025

In addition to routine fluid checks, replacing filters at manufacturer-recommended intervals helps keep dirt and debris out of critical components. From onboard sensors that monitor exhaust gas temperatures to integrated telematics systems providing real-time alerts, these tools streamline the troubleshooting process.

Engineering 130

Engineering Diesel Mechanics Mechanic Troubleshooting 130

Tomorrow's Technician

APRIL 3, 2024

From cutting-edge technology assistance to advanced troubleshooting techniques, attendees gain insights and resources to enrich their curriculum and engage students effectively. Connect with fellow educators, industry professionals, and exhibitors in a relaxed and welcoming atmosphere.

Education 130

Education Troubleshooting Automotive Manufacturing 130

Arizona Automotive Institute

MARCH 17, 2025

MIG welding is used in industries such as automotive repair, manufacturing, construction, and metal fabrication. They should be comfortable interpreting blueprints and instructions accurately, troubleshooting issues that arise during the welding process, and ensuring their work meets safety and quality standards.

Technical 52

Technical Automotive Body Repair Troubleshooting 52

Tomorrow's Technician

FEBRUARY 5, 2024

Troubleshooting an automatic transmission can be one of the most intimidating diagnostic procedures a shop faces today. Most vehicles manufactured after 2004 put the TCM or PCM module on the high-speed, two-wire CAN network along with BCM and ABS modules. The topology for these networks is typically a loop.

Technical 130

Technical Engineering Troubleshooting Hydraulics 130

RepairSmith

FEBRUARY 17, 2025

Parts quality: OEM (Original Equipment Manufacturer) parts are usually more expensive than aftermarket options. Troubleshooting and replacing a bad torque converter is a complex process that involves working on several transmission components. However, they offer better quality and durability than the aftermarket parts.

Auto Repair 52

Auto Repair Mechanic Engineering Vehicle 52

RepairSmith

JUNE 12, 2025

Troubleshooting these advanced systems requires technical know-how, extra care, and tools, such as a test light, scanner, or multimeter. Parts quality: Aftermarket kits can be budget-friendly, but they may not offer the same durability or performance as original equipment manufacturer (OEM) parts.

Mechanic 52

Mechanic Check Engine Light Vehicle Car 52

The Mechanic Doctor

MARCH 26, 2024

It encodes essential information such as the country of manufacture, the manufacturer, the vehicle type, and model year. The Essence of VIN: A Brief Overview Before delving into the world of VIN decoders, it’s essential to understand what a VIN is.

Vehicle 52

Vehicle Mechanic Automotive Troubleshooting 52

AutoInc.

FEBRUARY 14, 2025

“Andy and Doug, as well as the entire team at TAG Calibrations, are dedicated to ‘precisely calibrating the vehicle safety systems to function as the manufacturer intended.’ “They help us hire skilled technicians, keep our team updated on the latest technologies, and provide unmatched troubleshooting support.”

IT 61

IT Collision Repair Education Auto Repair 61

RepairSmith

DECEMBER 12, 2023

8 Handy Tips on Preventing 4WD Problems on Your Dodge Dakota Let’s steer into Dodge Dakota 4X4 troubleshooting and maintenance. In specific Dodge Dakota models (manufactured in 2005 and above), a series of components are attached to the Transfer Case Control Module (TCCM), including the A/C switch.

Mechanic 52

Mechanic Pit Crew Manufacturing Check Engine Light 52

RepairSmith

NOVEMBER 28, 2023

8 Handy Tips on Preventing 4WD Problems on Your Dakota Dodge Let’s steer into Dodge Dakota 4×4 troubleshooting and maintenance. In specific Dodge Dakota models (manufactured in 2005 and above), a series of components are attached to the Transfer Case Control Module (TCCM), including the A/C switch.

Mechanic 52

Mechanic Pit Crew Manufacturing Check Engine Light 52

RepairSmith

JANUARY 7, 2025

Original equipment manufacturer (OEM) or aftermarket alternatives: OEM parts are more expensive but ensure a better fit and performance. Also, check for manufacturer warranty on new parts and accessories. Troubleshooting and replacing a fan clutch requires technical expertise and proper tools.

Air Conditioning 52

Air Conditioning Engineering Electronics Mechanic 52

RepairSmith

FEBRUARY 10, 2025

Original Equipment Manufacturer (OEM) vs. aftermarket parts: While aftermarket gaskets are more affordable, original auto parts offer a precise fit and extended durability. If you suspect your gasket needs a look, visit a local repair shop or hire a professional for thorough and accurate troubleshooting.

Transmission Repair 52

Transmission Repair Mechanic Check Engine Light Car 52

RepairSmith

APRIL 15, 2024

It also depends on whether you opt for original manufacturer parts or aftermarket alternatives. If any issues arise, they’ll take troubleshooting steps to resolve the problem. The actual costs may vary a little bit based on your car’s make and model, the labor rates at the local repair shop.

Mechanic 52

Mechanic Car Technical Vehicle 52

Driver's Edge

SEPTEMBER 18, 2023

When researching potential options, make sure to ask about their credentials, such as Automotive Service Excellence (ASE) certifications or manufacturer-specific training. They should also have access to the necessary diagnostic tools and software to troubleshoot and fix any issues.

Mechanic 52

Mechanic ASE Customer Service Vehicle 52

Brake & Front End

JUNE 11, 2025

While TPMS is an important safety function, a malfunctioning TPMS sensor can lead to time-consuming troubleshooting for your shop and technicians. While TPMS is an important safety function, a malfunctioning TPMS sensor can lead to time-consuming troubleshooting for your shop and technicians.

Electronics 130

Electronics Troubleshooting Vehicle Consulting 130

CATI

MAY 15, 2025

Diagnostic Strategies Taught in Automotive School At a reputable automotive school like CATI, students learn a step-by-step process for troubleshooting no-start conditions. At an automotive school like CATI, students have the opportunity to explore no-start conditions. Do you want to explore automotive training programs at CATI school ?

Vehicle 62

Vehicle Troubleshooting Check Engine Light Automotive 62