Automotive Training Centre
MAY 16, 2024
Preventive Maintenance and Service Wheels, Tires, Hubs, and Bearings Preventive maintenance traditionally focuses on a vehicle’s mechanical aspects, ensuring everything from the engine to the suspension is in optimal condition. Modern vehicle maintenance ensures protection against hacking after automotive training.
Brake & Front End
SEPTEMBER 28, 2023
Where It Started: Hydraulic ARBs ARBs were introduced in the mid-to-late 1990s in some European vehicles. Hydraulic ARBs use hydraulic fluid to apply torsional force against the roll bar ( Figure 2 ). This is similar in principle to how hydraulic power steering systems apply force to the steering gear to provide steering assist.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Automotive Training Centre
SEPTEMBER 21, 2023
Carry Out Regular Inspections and Preventative Maintenance A best practice is regular inspection of suspension components. One key lesson from auto mechanic school is that: preventative maintenance is crucial. Here are three essential practices to keep in mind.
Tire Review Magazine
MARCH 7, 2024
During normal braking, the pressure from the master cylinder passes through the Hydraulic Control Unit (HCU) unaltered. If the ABS system detects that a wheel is on the verge of locking up, it enters an active state to prevent wheel lock-up and maintain vehicle stability. This allows the wheel to rotate freely, preventing lock-up.
CATI
OCTOBER 12, 2023
As a diesel mechanic apprentice, gaining a deeper understanding of diesel engine components, electronic systems, and hydraulics is paramount. Mastering Technical Proficiency and Adapting to Industry Advancements After Diesel Mechanic Training Central to a successful apprenticeship is the relentless pursuit of technical excellence.
Advanced Technology Institute
SEPTEMBER 2, 2021
LUS is also sponsoring ATI’s hydraulics program, which includes lending the campus use of a brand new L526 Wheel Loader to be used in school’s Heavy Vehicle Technology program. This type of loader is used extensively in construction, mining, waste management industries and more,” says ATI Campus Director of Training Robert Metzger.
Brake & Front End
MAY 9, 2024
Anyone who works on brakes should be familiar with basic hydraulics and the various components that make up the hydraulic portion of the brake system. It converts the force exerted on the brake pedal by the vehicle’s driver into hydraulic pressure to apply the brakes. The cure is to replace the master cylinder.
Expert insights. Personalized for you.
172 
Let's personalize your content